Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Fort Myers Shores, FL
We provide independent Gelco service across Fort Myers Shores, and the one thing that sets our work here apart is salt air. Chimneys near the Caloosahatchee River corrode faster than anything inland Lee County sees, so a Gelco cap, damper, or insert that looks fine on the outside is often failing underneath. We clean, inspect, and repair Gelco chimney equipment with parts that fit it, and we tell you plainly what the camera shows. Call (855) 473-9633. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Fort Myers Shores Residents Choose Us for Gelco Service
Chimney Sweep Lehigh Acres is an independent Gelco service provider. We are not affiliated with, authorized by, or certified by the manufacturer, and we say that up front because it matters. What we do have is hands-on familiarity with Gelco fireplaces built across Florida homes: the caps, the inserts, the dampers, the glass door assemblies. Our technicians have up to 8 years of experience learning how this equipment actually behaves in humid, storm-prone, salt-exposed conditions.
Fort Myers Shores homeowners call us because we cover the full arc of the work. Cleaning, repair, and dryer vent service come from one crew, so a corroded cap found during a sweep doesn’t need a second appointment with a second company. We use professional-grade materials from brands chimney technicians actually trust, including Gelco, DuraFlex, HeatShield, Olympia Chimney, Famco, and Copperfield. When we replace a cap or a damper, we choose parts specified for the system, not whatever fits loosely on the shelf.
Scheduling is straightforward. Tell us what you’re seeing, and we’ll set a time, inspect, and give you a written estimate before any work begins.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Fort Myers Shores
Gelco equipment fails in patterns we see over and over around Fort Myers Shores, and most of them trace back to the climate rather than the product.
- Rusted and seized caps. Chrome and powder-coated Gelco caps and their spark arrestors corrode and seize from salt-laden river air. The arrestor screen rusts through, or the whole cap works loose and blows off in a storm. By the time it looks worn, it’s usually already compromised.
- Fouled gas insert burners and pilots. Gelco gas insert burners and pilots foul with moisture and insect debris in humid, rarely-used fireplaces. That shows up as delayed ignition or a pilot that won’t stay lit, and it’s common in Fort Myers Shores homes where the fireplace goes untouched most of the year.
- Glazed creosote in idle wood inserts. Gelco wood inserts left idle for years collect soot that draws damp air. It hardens into glazed creosote inside the flue and puts stress on the firebox liner, which is a fire hazard worth taking seriously.
- Warped dampers and glass-door hardware. Seasonal humidity swings cause Gelco damper and glass-door hardware to warp or seize, so older units stop sealing tightly and leak smoke or rain into the room.
- Nesting in uncapped flues. Many Fort Myers Shores chimneys have rusted or missing spark arrestors, which leaves an open door for birds, squirrels, and insects. Blocked flues don’t draft, and they don’t vent safely either.
Gelco Service in Fort Myers Shores: What Local Conditions Mean for Your Equipment
Fort Myers Shores sits close to the Caloosahatchee River, and that proximity is the whole story for chimney equipment here. Salt air eats chimney caps and flashing faster than inland Lee County, so many Gelco caps in the area are rusted through or missing their spark arrestor long before they look worn from the ground. The humid subtropical climate and year-round warmth add to it: moisture never really dries out of a flue, and uncapped chimneys become a haven for birds, squirrels, or insects. In a Fort Myers Shores home with an unused Gelco wood insert, the first heavy summer rain often reveals a leak, with water tracking past a rusted Gelco cap or failed flashing. A follow-up inspection usually turns up bird or squirrel nesting blocking the flue. A qualified local pro typically pulls the nest and soot, checks the damper and firebox liner, replaces the corroded cap with a multi-flue or custom cap, and reseals the flashing and crown so the next storm doesn’t repeat the problem. That sequence is why we treat cleaning and cap work as one job here, not two.
Gelco Models & Products We Service in Fort Myers Shores
The Gelco equipment we service across Fort Myers Shores includes wood-burning fireplace inserts, gas fireplace inserts, stainless and powder-coated multi-flue chimney caps, and fireplace glass door and screen assemblies. Each brings its own failure pattern, and we match the repair to the part rather than treating everything the same way.
We use OEM Gelco caps, dampers, and glass hardware where they’re available, because fit and corrosion coatings matter in salt air. For routine wear, quality aftermarket screens, gaskets, and firebrick from names like DuraFlex, HeatShield, Olympia Chimney, and Famco do the job well and cost less. Our stance on repair versus replacement stays honest: we’ll repoint or recoat a sound Gelco firebox, but we won’t put a cosmetic patch on cracked or spalled brick. Call (855) 473-9633 for a free estimate.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Fort Myers Shores
A Gelco chimney cleaning in Fort Myers Shores typically runs $150 to $300, and cap or damper repair is usually quoted separately once we’ve seen the condition. Here’s how the line items break down.
| Service | Typical Estimate |
|---|---|
| Chimney sweep and inspection | $150 – $300 |
| Camera inspection and photo report | Included with the sweep |
| Gelco cap replacement (standard) | $200 – $450 |
| Custom or multi-flue cap | Quoted per job |
| Damper, glass-door, or hardware repair | $150 – $400 |
| Chimney waterproofing | $300 – $700 |
| Gas fireplace service (burner and pilot) | $150 – $350 |
What drives the cost is access, flue condition, and whether we find nesting, glazed creosote, or a rusted cap that needs replacing. The written estimate sets the final price, and the estimate itself is free. Nothing gets recommended without camera evidence you can see for yourself. Call (855) 473-9633 for an exact quote on your Fort Myers Shores chimney.
Serving Fort Myers Shores, FL – Our Local Coverage Area
We serve Fort Myers Shores and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Fort Myers Shores
Because salt air from the Caloosahatchee River attacks metal caps and flashing faster than inland conditions do. Powder-coated and chrome Gelco caps corrode and seize, and the spark arrestor screen often rusts through while the cap still looks intact from the ground. A corroded cap lets water and wildlife in, so replacing it early saves a bigger repair later. Call (855) 473-9633 for a free estimate.
Most likely the burner and pilot are fouled with moisture and insect debris, which is common in humid, rarely-used fireplaces here. That causes delayed ignition or a pilot that won’t stay lit. We clean the burner assembly, check the pilot, and test it safely. Gas work isn’t a do-it-yourself job, so have a trained technician look at it. Call (855) 473-9633 to book a visit.
Yes, and often more so. A fireplace that rarely burns still collects moisture, soot, and nesting animals, and in this climate those build up year-round. Even a decorative fireplace should be inspected so a blocked flue or cracked liner doesn’t go unnoticed. Call (855) 473-9633 for a free estimate.
Sometimes, but it depends on the specific unit and the venting setup, so it needs an inspection first. We’ll tell you honestly whether the conversion makes sense or whether servicing the existing insert is the better route. Either way, we won’t recommend it without showing you what we found. Call (855) 473-9633 to schedule.
Water tracking past a rusted Gelco cap or failed flashing is the usual cause in Fort Myers Shores. Summer thunderstorms expose the problem, and the fix is a new cap plus resealed flashing and crown. Left alone, that moisture reaches the firebox and liner. Call (855) 473-9633 for a free estimate.
Service Areas Near Fort Myers Shores
We also work in Buckingham and Gateway, along with Lehigh Acres, LaBelle, and Port LaBelle. Same Gelco service, same camera inspection, same written estimate. If you’re just outside these areas, call and we’ll confirm coverage.
Learn more about our Gelco expertise, or see our full Fort Myers Shores service page.
Book Your Gelco Service in Fort Myers Shores Today
Whether it’s a rusted Gelco cap, a gas insert that won’t light, or a sweep you’ve put off, we can take a look and give you a clear, free estimate. Call (855) 473-9633. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Lehigh Acres.